SC-B9580 User's Guide Basic Operations Basic Operations 6. Check the status of the printer Workflow for Correct Printing U “Before Printing” on page 46 Follow the instructions below to print correctly on your media. 7. Print Print from Epson Edge Print or a commercial software RIP. 1. Register media settings to the printer To print in the optimum conditions for the media you are using, you must register the print information and the setting values that are appropriate for the media you are using to the printer and the RIP. You can easily register media settings to the printer using the following method.
Registering Media Settings to the Printer U “Registering Media Settings to the Printer” on page 36 You can register media settings in one of the following ways. Using the general-purpose media settings that are pre-registered in the printer This printer is equipped with six pre-registered media types corresponding to different media types, allowing you to print using universal media settings suitable for each type. 2. Load media U “Loading Media” on page 38 After loading the media, select the media type appropriate for the loaded media in Media Settings. 3.
Make settings for loaded media U “Make Settings for Loaded Media” on page 39 U “Make Settings for Loaded Media” on page 39 Downloading an EMX file and registering the settings An EMX file provided by Epson is a single print settings file containing the following information necessary to print properly on commercially available media (the provided files differ according to the country and region in which you live). 4. Load into the auto take-up reel unit U “Loading into the Auto Take-up Reel Unit” on page 41 ❏ Print Information: Settings for ICC profiles that are used in RIP, the number of passes, the resolution, and so on 5.
Optimize the media settings (when using new media) U “Optimizing Media Settings (Print Adjustments)” on page 47 36