SC111 Chassis Manual 4-2 Control Panel Buttons The SC111 chassis includes two or three push-buttons located on the front panel: a reset button, a power on/off button, and a UID button Reset: The reset button is used to reboot the system. t Power: The main power switch is used to apply or remove power from the power t supply to the server system. Turning off system power with this button removes the main power but keeps standby power supplied to the system. Therefore, you must unplug system before servicing. UID: When used with a UID-compatible motherboard, the UID button is used t to turn on or off the blue light function of the the U-LED.
Once the blue light is activated, the unit can be easily located in very large racks and server banks. 4-2