Super Micro Computer, Inc. SC113 Chassis — Super Micro SC113 Chassis Manual PDF Download

SC113 Chassis Manual 5-6 Removing the Backplane The SC113 chassis backplane is located behind the hard drives and in front of the front system fans. In order to change the jumper settings on the backplane, it may be necessary to remove the backplane from the chassis. Removing the Backplane from the Chassis 1. Power down the system as described in Section 5-2 and remover the cover.. 2. Disconnect the cabling to the backplane. 3. Remove the five upper screws at the top of the backplane, indicated by the arrows below. 4. Lift the backplane up and out of the chassis. Removing the Screws 1 4 1 3 Figure 5-5. Removing the Backplane 5-6