SC213 Chassis Manual 4-2 Control Panel Buttons The chassis includes two push-buttons that control power to the system. Power : The main power switch is used to apply or remove power from the power supply to the server. Turning off system power with this button removes the main power but maintains standby power. To perform many maintenance tasks, you must unplug system before servicing. Reset : The reset button is used to reboot the system. A needle, pen, or other small device is required to activate this button and reset the system 4-3 Control Panel LEDs There are six LEDs that provide status information about the system. Power :
Indicates power is being supplied to the system power supply units. This LED should normally be illuminated when the system is operating. HDD : Indicates IDE channel activity on the hard drive when flashing. NIC2 : Indicates network activity on GLAN2 when flashing. 4-2