Chapter 5: Chassis Setup and Maintenance 5. As required by your motherboard, install standoffs in any areas that do not have a permanent standoff and remove any standoffs that are not required by the motherboard. 6. Lay the motherboard in the chassis aligning the permanent and optional stand offs. 7. Secure the motherboard to the chassis using the rounded, Phillips head screws which are included in the motherboard bag of the accessory box. Do not exceed eight inch-lbs of torque when tightening the screws. 8. Secure the CPUs, heatsinks, and other components to the motherboard as described in the motherboard documentation. 9.
Connect the cables between the motherboard, backplane, chassis, front panel, and power supply, as needed. The fans may be temporarily removed to allow access to the backplane ports and to allow for ease of installation. Figure 5-7. Installing the Motherboard 5-7