SC213L Chassis Manual 5-9 Power Supply The chassis may have a single power supply or two redundant power supplies, depending on the model. In either case, the power supplies automatically sense the input voltage from 100v to 240v and operate accordingly. A green light on the power supply indicates that the power supply is operating. An amber light indicates the system power is off. Single Unit Changing a Single Power Supply 1. Unplug the power cord. 2. On the back of the unit, push the release tab and pull the power supply out 3. Push the new power supply module into the power bay until the tab clicks into using the handle. the locked position. 4. Plug in the AC power cord.
Redundant Units The power modules are hot-swappable, so they can be changed without powering down the system. This is facilitated by the power distributor in the chassis. Release Tab Figure 5-14. Removing the Power Supply 5-14