SC502 Chassis Manual 5-4 Installing the Motherboard Chassis Standoffs Figure 5-4: Chassis Standoffs Chassis Standoffs Standoffs prevent short circuits by securing space between the motherboard and the chassis surface. The SC502 chassis includes permanent and removable standoffs in locations used by Micro ATX 9.6" x 9.6" size motherboards. These standoffs accept the rounded Phillips head screws included in the SC502 accessories packaging. Motherboard Installation Installing the Motherboard Review the documentation that came with your motherboard. Become familiar 1. with component placement, requirements, precautions, and cable connec tions.
The SC502 chassis supports 9.6" x 9.6" Micro ATX motherboards. Refer to the Supermicro Web site for details or contact Supermicro for assistance. Install or remove the necessary removable standoffs to fit with the mounting 2. holes of the motherboard. Lay the motherboard on the chassis aligning the board with the standoffs. 3. Secure the motherboard to the chassis using the rounded, Phillips head 4. screws. Secure the CPU(s), heatsinks, and other components to the motherboard as 5. described in the motherboard documentation. Connect the cables between the motherboard, chassis, front panel, and 6. power supply, as needed 5-4