Super Micro Computer, Inc. SC502 — Super Micro SC502 Chassis Manual: Comprehensive Guide for System Integrators

Chapter 5: Chassis Setup and Maintenance Add-on Card/Expansion Slot Setup SC502 chassis includes an I/O slot for the optional add-on card. A full-height, half- length PCI add-on card is supported. A riser card is required in order to adapt the add-on card to the 1U chassis. For further information on add-on cards and risers cards, refer to the Supermicro website at www.supermicro.com Add-on Card Clip Installing the Add-On Card Figure 5-5: Locate the Add-on Card Clip Locate the add-on card clip on the back of the chassis 1. Remove the screws holding the add-on card clip and the dummy bracket 2. which covers the openings in the back of the chassis.

Remove the add-on card clip and the dummy plate from the chassis. 3. Outside of the chassis, put the add-on card and the riser card together by 4. inserting the add-on card into the riser card. Add-on Card Clip Add-on/Expansion Card Slot Figure 5-6: Install the Add-on Card and Riser Card 5-5