SC502 Chassis Manual 1U Active Heatsink (SNK-P0032A4) It is critical to choose the correct heatsink for your motherboard, that will fit in the SC502-200B chassis. Recommended heatsink: Intel Celeron 400 series (35W) platform: Active heatsink SNKP0032A4 Figure A-2: SNK-P00A4 Active Heatsink The SNK-P00A4 active heatsink may only be used on specific motherboards, due to its larger 4" x 4" size. This is particularly important in systems utilizing Intel Celeron 400 series platforms. To ascertain which heatsink is appropriate for your motherboard, refer to the Supermicro Web site at http://www.supermicro.com.
Extending Power Cables Although Supermicro chassis are designed with to be efficient and cost-effective, some compatible motherboards have power connectors located in different areas. To use these motherboards you may have to extend the power cables to the mother boards. To do this, use the following chart as a guide. Front Panel to the Motherboard The SC502 chassis includes a cable to connect the chassis front panel to the motherboard. If your motherboard uses a different connector, use the following list to find a compatible cable.
A-2 Power Cable Extenders Number of Pins C able Part # Length 24 pin CBL - 0042 7.9”(20 CM) 20 pin CBL - 0059 7.9”(20 CM) 8 pin CBL - 0062 7.9”(20 CM) 4 pin CBL - 0060 7.9”(20 CM)