Appendix A: Chassis Cables * Split cables: Use these cable if your motherboard requires several different con nections from the front panel. A-4 Chassis Screws The accessory box includes all the screws needed to setup your chassis. This section lists and describes the most common screws used. Your chassis may not require all the parts listed.
M/B HARD DRIVE Pan head 6-32 x 5 mm [0.197] Flat head 6-32 x 5 mm [0.197] DVD-ROM, CD-ROM, and FLOPPY DRIVE Flat head 6-32 x 5 mm [0.197] Round head M3 x 5 mm [0.197] Round head M2.6 x 5 mm [0.197] Pan head 6-32 x 5 mm [0.197] RAIL Flat head M4 x 4 mm [0.157] Round head M4 x 4 mm [0.157] Flat head M5 x 12 mm[0.472] M/B STANDOFFS Washer for M5 M/B standoff 6-32 to 6-32 M/B (CPU) standoff M5 to 6-32 Thumb screw 6-32 x 5 mm [0.197] 1/U M/B standoff 6-32 x 5 mm [0.197] A-3 Front Panel to Motherboard Cable (Ribbon Cable) Number of Pins (Front Panel) Number of Pins (Motherboard Cable Part # 16 pin 16 pin CBL - 0049 16 pin 20 pin CBL - 0048 20 pin 20 pin CBL - 0047 16 pin various* CBL - 0068 20 pin various* CBL - 0067