Supermicro SC512F — Supermicro SC512F Chassis Manual: 1U Server Guide & Specs PDF

Chassis Manual 5-3 Installation Step 1: Remove the Chassis Cover Remove these screws Remove these screws Flat head 6-32 x 5 mm [0.197] Remove this screw Figure 5-1: Removing the Chassis Cover To remove the chassis cover: 1. Remove the screws holding the chassis cover in place. 2. Apply pressure to the middle front of the chassis cover. 3. Slide the cover toward the rear of the chassis. Warning: Except for short periods of time, do NOT operate the server without the cover in place. The chassis cover must be in place to allow proper airfl ow and prevent overheating. ! 5-2