Supermicro SC512F — Supermicro SC512F Chassis Manual: 1U Server Guide & Specs PDF

Chapter 5: Chassis Setup and Maintenance 5-4 Installation Step 2: Install Hard Drives Remove these screws Flat head 6-32 x 5 mm [0.197] DVD-ROM/CD-ROM Drive Figure 5-2: Remove the CD-ROM Drive to access the Hard Drive area To add a hard drive to the chassis: Before adding a hard drive, you must remove the DVD-ROM/CD-ROM drive. 1. Open the chassis cover. 2. If you have not already done so, remove the fan tray. For more information on removing the fan tray, see the Maintenance section located at the end of this chapter. 3. Remove the CD-Rom drive. To do this, remove the two screws holding the drive in place. One screw is external. The other is internal. 5-3