Chapter 6: Rack Installation Installing the Inner Rail Extension The SC512F includes chassis ears that you must remove before installing the rails. To remove the chassis ears: 1. Locate and remove the three screws holding the chassis ear in place. 2. Repeat step on with the other chassis ear. Flat head M4 x 4 mm [0.157] Figure 6-2: Identifying the Sections of the Rack Rails To install the inner rails 1. Place the inner rail on the side of the chassis aligning the hooks of the chassis with the rail holes. 2. Slide the rail toward the front of the chassis to secure the rail in place. 3. Secure the chassis with four screws. 4. Repeat steps 1-3 for the other inner rail extension. 6-5