Supermicro SC512F — Supermicro SC512F Chassis Manual: 1U Server Guide & Specs PDF

Chassis Manual Flat head M5 x 12 mm [0.472] Washer for M5 Secure to the Rear of the Rack Attach Outer Racks together Secure to the Front of the Rack Figure 6-3. Assembling the Outer Rails Installing the outer rails to the rack 1. Attach the short bracket to the outside of the long bracket. You must align the pins with the slides. Also, both bracket ends must face the same direction. 2. Adjust both the short and long brackets to the proper distance so that the rail fi ts snugly into the rack. 3. Secure the long bracket to the front side of the outer rail with two M5 screws and the short bracket to the rear side of the outer rail with three M5 screws. Use a washer with each screw. 4.

Repeat steps 1-4 for the left outer rail. 6-6