Super Micro Computer, Inc. SC513 — Super Micro SC513 Chassis Manual: Comprehensive Guide for System Integrators

SC513 Chassis Manual Standoffs prevent short circuits by securing space between the motherboard and the chassis surface. The SC513 chassis includes permanent standoffs in locations used by most motherboards. These standoffs accept the rounded Phillips head screws included in the SC513 accessories packaging. Standoffs Round head 3 x 5 mm [0.197] Figure 5-7: Motherboard Standoffs Installing the Motherboard Review the documentation that came with your motherboard. Become familiar 1. with component placement, requirements, precautions, and cable connec­ tions. Disconnect the chassis from any power source. 2. Compare the mounting holes in the motherboard and the mounting holes in 3.

the chassis and add or remove standoffs as required. Align the motherboard with the chassis standoffs and carefully, place the 4. motherboard in the chassis. Make sure rear ports line up with the I/O shield. Secure the motherboard to the chassis. Do not exceed eight pounds of torque 5. when tightening down the motherboard. Secure the CPU(s), heatsinks, and other components to the motherboard as 6. described in the motherboard documentation. Connect the cables between the motherboard, backplane, chassis, front 7. panel, and power supply. 5-6 doffs