SC513 Chassis Manual 5-6 Installing the Air Shroud The air shroud helps cool the chassis by directing heated air through the rear of the chassis. When installing the air fan, be aware of the following: The air shroud is designed to fit within the chassis. The sides of the air shroud should remain straight in relation to the top. Do not fold or bend the air shroud. Incorrect Incorrect Correct Figure 5-9: Air Shroud Placement 1 2A 1 2B Figure 5-12: Installing the Air Shroud in a DP Chassis Installing the Air Shroud in a DP Chassis DP Chassis - Installing The Air Shroud Confirm that the air shroud matches your chassis model. 1.
Place the air shroud in the chassis, aligning the mounting tabs on the system 2. fan with the corresponding holes on the floor of the chassis. Align the two clips on the air shroud (2A) with the holes on the system fan 3. tray (2B). Insert the clips on the air shroud into the holes on the system fan tray. 4. 5-10