Supermicro SC523 Chassis — 5-2 Removing the Power Cord

Chapter 5: Chassis Setup and Maintenance Chapter 5 Chassis Setup and Maintenance 5-1 Overview This chapter covers the steps required to install components and perform mainte- nance on the chassis. The only tools needed to install components and perform maintenance is a Phillips screwdriver and under certain circumstances, a hex wrench. 5-2 Removing Power From the System Before performing any setup or maintenance on the chassis, use the following procedure to ensure that power has been disconnected from the system. 1. Use the operating system to power down the system, following the on-screen prompts. 2.

After the system has completely shut down, carefully grasp the head of the power cord and gently pull it out of the back of the power supply. 3. Disconnect the cord from the power strip or wall outlet. Review the warnings and precautions listed in the manual before setting up or servicing this chassis. These include information in Chapter 2: Standardized Warning Statements for AC Systems and the warnings/precautions listed in the setup instructions. 5-1