Supermicro SC523 Chassis — Power Supply Replacement SC523L-520B or SC523L-410B

SC523 Chassis Manual Chapter 5: Chassis Setup and Maintenance 5 Power Supply Bracket Screws 2 Power Supply Bracket Screws 7 3 4 Mounting Screws 6 Power Supply Bracket 4 Mounting Screws 1 Power Supply Bracket Figure 5-15. Removing the Power Supply Figure 5-14. Removing the Power Supply 4. Remove the mounting screws holding the power supply to the floor of the chassis and set them aside for later use. Installing the Power Supply 5. Remove the screws holding the power supply bracket to the rear of the power supply and set them aside for later use. 1. Place the power supply bracket on the rear of the power supply 2.

Use the power supply bracket screws previously set aside to attach the power supply bracket to the rear of the power supply. 6. Remove the power supply bracket. 7. Gently pull the power supply out of the chassis. 3. Gently push the new power supply module into the power bay until it clicks into the locked position. 4. Insert the mounting screws up through the bottom of the chassis and into the power supply. 5. Plug the AC power cord into the module and power-up the system. 5-16 5-17