Supermicro SC733 — Supermicro SC733 Chassis Manual: User & Service Guide PDF

Chapter 4: Chassis Setup and Maintenance 4-4 Installing Hard Drives in the SC733T and SC733TQ 2 Release Button Figure 4-4: Removing the Hard Drive Carrier from the Chassis The SC733T and SC733TQ models feature hot-swappable hard drives, which permit the exchange of hard drives, without powering down the system Removing Hard Drive Carriers in the SC733T and SC733TQ Chassis 1. Unlock the front bezel panel of the chassis and swing the panel to the right to open it as shown above. 2. Press the release button on the front of the drive carrier. This will release the drive carrier handle. 3. Using the drive carrier handle, gently pull the drive carrier out of the chassis. Warning!

Enterprise level hard disk drives are recommended for use in Supermicro chassis and servers. For information on recommended HDDs, visit the Supermicro web site at http://www.supermicro.com. 4-5