Chassis SC745 User's Manual Configuring the 5.25" Drive Bays The control panel/drive module includes three 5.25" drive bays under the front control panel. It can be set up in a variety of configurations to suit the user's needs. Up to three 5.25" peripheral drives, such as a DVD drive One or two additional fixed SATA, SAS or solid state drives in a single tray A mobile rack with eight additional 2.5" hot-swap hard drives (replaces two 5.25" bays; requires an optional expansion card and cables) A combination of the above 1. Open the chassis cover. Accessing the 5.25" Trays 2. Locate the drive tray and pull the appropriate release tab. 3. Push the drive tray out of the front of the chassis.
Drive Tray Release Tabs Figure 3-7. Removing a Drive Tray 30