Chapter 3: Maintenance and Component Installation Installing a Storage Drive into a 5.25" Tray One 3.5" drive, or two 2.5" drives with an optional bracket (pn MCP-220-00044-0N) can be installed. An optional expansion card and cables are also required. 1. Remove the tray from the drive bay. 2. For a 3.5" drive, place the drive in the drive tray, and secure the drive to the tray with four screws from the bottom. For one or two 2.5" drives, install the drives into the special purpose bracket, then secure the bracket to drive tray with screws through the bottom of the tray. Drive Tray Drive Figure 3-8. Installing a 3.5" Drive to the Drive Tray 3.
Slide the drive tray into the chassis until the tray clicks into place. 4. Connect the data and power cables for the new drive. 5. Replace the chassis cover and power up the system. 31