Appendix D: BPN-SAS3-743A Backplane Specifications Rear Jumpers and Pin Definitions The jumpers are used for internal texting only. Figure D-2. Rear Jumpers Jumper Settings Jumper JP8 JP9 ACTLED Explanation of Jumpers To modify the operation of the backplane, jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change the function of the connector. Pin 1 is identified with a square solder pad on the printed circuit board. Connector Pins 3 2 1 Jumper Note: On two pin jumpers, "Closed" means the jumper is on and "Open" means the jumper is off the pins. 3 2 1 Setting 71 JP8 JP9 ACTLED Jumper Settings Note 2-3:
Default This is used for internal testing only. 1-2: Default This is used for internal testing only. Open: Default This is used for internal testing only.