Super Micro Computer, Inc. SC811 — Super Micro SC811 Chassis Manual PDF Download

Chapter 4: Chassis Setup and Maintenance 4-6 Installing the Expansion Card The SC811 chassis includes a slot for one full-length/full-height expansion card slot. Insert the Expansion Card Riser Card Bracket Figure 4-6. Expansion Card Installation Installing the Expansion Card 1. Power down the system as described in Section 4-2, lay the chassis on a flat surface, and open the chassis cover. 2. In the rear of the chassis, pull open the expansion card clip and remove the PCI slot shield. 3. Confirm that the expansion card has an L-bracket and connect the expansion card to the riser card which is embedded in the riser card bracket. 4.

When the expansion card is installed in the riser card, the L-bracket slides into the PCI slot. Note that most expansion cards face downward once installed. 5. Close the expansion card clip to secure the L-bracket and expansion card. 4-7