Super Micro Computer, Inc. SC811 — Super Micro SC811 Chassis Manual PDF Download

SC811 Chassis Manual A-4 Cables Included with the SC811T Chassis (SCSI) Note: Items may change without notice. Refer to http://www.supermicro.com for the latest information. A-5 Compatible Cables These cables are compatible with the SC811 chassis. Alternate SAS/SATA Cables Some compatible motherboards have different connectors. If your motherboard has only one SAS connector that the SAS/SATA cables must share, use one of the following cables. These cables must be purchased separately. Cable Name: SAS Cable Quantity: 1 Part #: CBL-0175L Alt. Name: "Big Four" Description: This cable has one SFF-8484 (32-pin) connector on one end and four SAS connectors (with seven pins each) at the other.

This cable connects from the host (motherboard or other controller) to the backplane's SAS hard drive port. Cable Name: SAS Cable Quantity: 1 Part #: CBL-0116 Alt. Name: iPass or "Small Four" Description: This cable has one iPass (SFF-8087/Mini-SAS) connector (36-pin) at one end and four SAS connectors on one end. This cable connects from the host (motherboard or other controller) to the backplane's SAS hard drive port. A-2 SC811T Part # Type Length Description CBL-0061 Cable 13.8 inches Amphenol Serial ATA cable