SC815 Chassis Manual Solid Green: When illuminated, this green LED indicates that the power supply is on. All Other Power Supplies Solid Amber: When illuminated, the amber LED indicates the power supply is plugged in and turned off, or the system is off but in an abnormal state. 4-6 Overheating The section lists actions that should be taken in the unlikely event the server overheats. Overheat Temperature Setting Some backplanes allow the overheat temperature to be set at 45, 50, or 55 by changing a jumper setting. For more information, download the backplane user manual at www.supermicro.com. To access the manuals on the Website, click sup- port, and then click the manuals link.
Overheating Condition If the Server Overheats, do the Following: 1. Use the LEDs to determine the nature of the overheating condition. 2. Confirm that the chassis covers are installed properly. 3. Check the routing of the cables and make sure all fans are present and oper- ating normally. 4. Verify that the heatsinks are installed properly. 4-6 All Other Power Supply LEDs State Indication Solid Green System is on. Solid Amber System is off and plugged in.