Super Micro Computer, Inc. SC825 — 5-3 Removing Power

SC825 Chassis Manual 5-3 Removing Power Use the following procedure to ensure that power has been removed from the sys­ tem. This step is necessary when removing or installing non hot-swap components or when replacing a non-redundant power supply. 1. Use the operating system to power down the system. 2. After the system has completely shut-down, disconnect the AC power cord(s) from the power strip or outlet. (If your system has more than one power sup­ ply, remove the AC power cords from all power supply modules.) 3. Disconnect the power cord(s) from the power supply module(s) 5-2