Chapter 5: Chassis Setup and Maintenance 5-4 Removing the Chassis Cover 1 Remove Screw 1 4 1 2 1 3 1 2 1 Remove Screw Release Tab The chassis features a removable top cover for access to the internal com ponents. When performing service on components inside the system, remove the system from the rack and place it on a work bench or desk. Do not service with the system extended from the rack. Figure 5-1. Removing the Chassis Cover Removing the Chassis Cover 1. Power down the system and remove the power cords from the rear of the power supply. 2. Remove the two screws on each side of the cover, which secure the cover to the chassis. 3.
Press the release tabs to remove the cover from the locked position. Press both tabs at the same time. 4. Once the top cover is released from the locked position, slide the cover toward the rear of the chassis. 5. Lift the cover off the chassis. Caution: Except for short periods of time, do NOT operate the server without the cover in place. The chassis cover must be in place to allow proper airflow and prevent overheating. 5-3