SC825 Chassis Manual 1. Power down the system. Remove the power cords from the rear of the power supply. Open the chassis cover as described in Section 5-3. Installing Expansion Cards in SC825B2-W (4x FH and 3x LP) Chassis 2. Pull the top load riser card bracket up and out from the system. 3. Attach the riser card(s) to the top load riser card bracket using the provided screws. Note that there are different cards for the right and left side of the bracket. Top Load Riser Card Bracket Riser Card 4. Install the expansion cards in the slots on the riser card bracket Expansion Cards 5-16