Chapter 5: Chassis Setup and Maintenance Expansion Card PCI Slot Setup SC825: The chassis includes PCI slots for expansion cards. The number of cards you can use depends on your chassis model. SC825 LP: Provides seven low-profile PCI slots. SC825U and SC825W: Provides four full-height/full-length and three low-profile PCI slots through a user defined universal expansion card. SC825B2-W: Provides four full-height/full-length and three low-profile PCI slots through a user defined universal expansion card. PCI Slots Figure 5-15. SC825 LP model PCI Slot Setup in LP (Low-Profile) Chassis SC825 chassis include PCI slots for expansion cards.
The number of cards you can use depends on your chassis model and motherboard model. Installing Expansion cards in SC825LP (Low-Profile) Chassis 1. Power down the system and remove the power cords from the rear of the power supply. Open the chassis cover as described in Section 5-3. 2. Remove the screw holding the cover in place for each low-profile PCI slot you want to use. Keep this screw for later use. 3. Connect the expansion cards to the mother board. 4. Secure each card to the chassis using the card's L bracket and the screw previously removed. 5-15