Appendix B: BPN-SAS-825TQ Backplane Specifications #8 and #9 Sideband Headers The sideband headers are designated JP51 and JP52. For SES-2 to work properly, you must connect an 8-pin sideband cable. See the table to the right for pin definitions. #10 MG9072 Chip The MG9072 is an enclosure management chip that supports the SES-2 controller and SES-2 protocols. #11 Upgrade Header The upgrade header is designated JP46 and is used for manufacturing purposes only. #12 to #19 SAS Ports The SAS ports are used to connect the SAS drive cables. The eight ports are designated #0 - #7. Each port is also compatible with SATA drives. B-5 Sideband Headers Pin # Definition Pin # Definition 2 SGPIO:
SDIN; I2C: Backplane Addressing 1 Controller ID (SB6) 4 SGPIO: SDOUT; I2C: Reset 3 GND (SB2) 6 GND (SB3) 5 SGPIO: SLOAD; I2C: SDA 8 Backplane ID (SB7) 7 SGPIO: SCLOCK; 12C: SCL 10 No Connec tion 9 No Connec tion