Supermicro SC825M(B) — Supermicro SC825M(B) Chassis Manual: 2U Short-Depth Server Rack System

Chapter 5: Chassis Setup and Maintenance B A Figure 5-17. Removing the Retention Bracket (WIO Chassis Shown) 5. Remove the screw and the retention bracket securing the right side of the full height PCI slot covers (A) (see Figure 5-17). For UIO chassis (not shown), rotate the latch instead. Once the retention bracket or latch is loose, remove the chassis L-bracket access from the inside of the chassis, see Figure 5-17. 6. Remove the screw and the retention bracket securing the left side of the PCI slot low profile covers (B), see Figure 5-17 for WIO chassis. For UIO chassis (not shown), rotate the latch instead.

Once the retention bracket or latch is loosen, remove the chassis L-bracket access from inside of the chassis, see Figure 5-18. 7. Insert each expansion card into the PCI slot using the card's L bracket. 8. Secure each expansion card in its PCI slot by closing the PCI slot latch, or reinstall the retention bracket. Figure 5-18. Removing an Expansion Card Slot Shield 5-15