SC835 Chassis Manual Motherboard Installation Procedure Figure 5-6. Installing the Motherboard Installing the Motherboard 1. Review the documentation that came with your motherboard. Become familiar with component placement, requirements, and precautions. 2. Open the chassis cover. 3. Remove any packaging from the chassis. If the rear fan or the air shroud is in place, remove them. 4. Install the I/O shield that accompanies your motherboard on the rear of the chassis. 5. If required by your motherboard, install standoffs in any areas that do not have a permanent standoff. To do this, tighten a hexagonal optional standoff into the chassis. 6.
Lay the motherboard on the chassis aligning the permanent and optional standoffs. 7. Secure the motherboard to the chassis using the rounded, Phillips head screws. Do not exceed eight inch-lbs of torque when tightening. 8. Secure the CPUs and heatsinks to the motherboard. 5-8