Supermicro SC835 — 5-6 Installing Expansion Cards

Chapter 5: Chassis Setup 5-6 Installing Expansion Cards The chassis includes space for up to seven expansion cards. Expansion Card Slots I/O Port Panel Figure 5-7. Expansion Card Slots and I/O Ports Installing Expansion Cards 1. Remove the chassis cover. 2. Locate the motherboard port aligned with the card slot you want to install. 3. Each slot is secured by one screw located on the top (inside) the chassis. Remove this screw. 4. Gently slide the expansion card into the correct motherboard slot. If the expan­ sion card requires a riser card, install it at this time. If necessary, slide the card into the PCI card guide and lock it. Never force a component into a motherboard or the chassis. 5.

Secure the expansion card with the screw from the I/O panel. 5-9