SC835 Chassis Manual 5-7 Installing Cooling Elements 1 3 1 2 Figure 5-8. Installing the Air Shroud Air shrouds concentrate airflow to maximize fan efficiency. The SC835 chassis air shroud does not require screws to set it up. Note that the rear fans must be removed prior to installing the air shroud. Installing the Air Shroud 1. Check that the rear fans have been removed from the chassis. 2. Place the air shroud over the motherboard as illustrated above, aligning the air shroud between the front and rear fans. 3. Install the rear fans behind the air shroud. See the Rear System Fans section of this chapter for additional details. 5-10