Supermicro SC835 — Replacing a System Fan

Chapter 5: Chassis Setup System Fans Five heavy-duty fans provide cooling for the chassis, three front fans and two rear fans. The fans are fully hot-swappable, that is they may be removed and replaced without having to power-down the server. Fan Release Tab Fan Release Tab Front Fan (3 total) Rear Fan (2 total) Figure 5-9. Chassis Fans Replacing a System Fan Installing a System Fan 1. Open the chassis and locate the faulty fan. Never run the chassis for an extended period of time with the chassis open. 2. Press the release tab on the fan and pull the fan upward. 3. Slide the new fan into the fan housing. Make sure the power connectors are correctly aligned.

The new fan will be immediately active. 5-11