Supermicro SC835 — Identifying the Sections of the Rack Rails

SC835 Chassis Manual 6-2 Rack Mounting Instructions This section provides information on installing the chassis into a rack unit with the rails provided. There are a variety of rack units on the market, which may mean that the assembly procedure will differ slightly from the instructions provided. You should also refer to the installation instructions that came with the rack unit you are using. This rail will fit a rack between 26" and 33.5" deep. Identifying the Sections of the Rack Rails The chassis package includes two rail assemblies in the rack mounting kit. Each assembly consists of three sections:

an inner chassis rail which secures directly to the chassis, an outer rail that secures to the rack, and a middle rail which extends from the outer rail. These assemblies are specifically designed for the left and right side of the chassis. Rail Assembly (Shown with Rails Retracted) Outer Rail Middle Rail Locking Tab This Side Faces Outward Inner Rail Figure 6-1. Identifying the Outer Rail, Middle Rail and Inner Rails (Left Rail Assembly Shown) 6-4