Supermicro SC835 — Releasing the Inner Rail

Chapter 6: Rack Installation Locking Tabs Each inner rail has a locking tab. This tab locks the chassis into place when installed and pushed fully into the rack. These tabs also lock the chassis in place when fully extended from the rack. This prevents the server from coming completely out of the rack when the chassis is pulled out for servicing. Releasing the Inner Rail Releasing Inner Rail from the Outer Rails 1. Identify the left and right outer rail assemblies. 2. Pull the inner rail out of the outer rail until it is fully extended as illustrated below. 3. Press the locking tab down to release the inner rail. 4. Repeat steps 1-3 for the second outer rail. 1 1 1 2 1 3 1 4 Figure 6-2.

Extending and Releasing the Inner Rail 6-5