Chapter 4: Chassis Setup and Maintenance 4-12 Optional Drives The SC846 chassis supports optional additional drives. For each Position A and B, the user may install one of the choices listed in the following table. A B Figure 4-22. Drive Location Options Fixed Internal Hard Drives For 3.5" drives, use the mounting tray, MCP-220-84601-0N. For fixed 2.5" drives, use the mounting tray, MCP-220-00051-0N, and attach to MCP-220-84601-0N. Note: SC846B does not support 3.5" HDD tray in position B. Installing the Fixed Hard Drive 1. Power down the system as described in section 4-2 and remove the chassis cover.
4-19 Position SC846B Models Non "B" Models Position A One fixed 3.5" HDD Two fixed 2.5" HDDs One fixed 3.5" HDD Two fixed 2.5" HDDs Position B Two hot-swap 2.5" HDDs One fixed 2.5" HDD One DVD drive One fixed 3.5" HDD One fixed 2.5" HDD One DVD drive