Appendix B: SAS-846TQ Backplane Specifications B-6 Rear Jumper Locations and Pin Definitions JP35 JP50 JP97 JP99 JP98 JP100 JP129 JP84 Figure B-3: Rear Jumpers Explanation of Jumpers To modify the operation of the backplane, jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change the function of the connector. Pin 1 is identified with a square solder pad on the printed circuit board. Note: On two pin jumpers, "Closed" means the jumper is on and "Open" means the jumper is off the pins. Connector Pins 3 2 1 Jumper Setting 3 2 1 B-7 JP61 JP62 JP63 JP64