Chapter 4: Chassis Setup and Maintenance The chassis offers the option of adding up to six hard disk drives in a special purpose drawer accessable from the rear of the chassis. Some configurations require an optional mounting bracket or kit. Optional HDDs in the Rear of the Chassis Drive Bracket } } } Position C Position B Position A Figure 4-7. Drive Drawer with the Hot-Swap Drive Kit Drives can be installed in one or more of three positions in the drawer, as labeled in the diagram above, positions A, B, and C.
4-7 Drives Configurations Position A Two 2.5" hot-swap or two 2.5" fixed or one 3.5" fixed Position B Two 2.5" fixed or one 3.5" fixed Position C Two 2.5" fixed or one 3.5" fixed Optional Bracket or Kit Required Drive Configuration Part Number Two hot-swap 2.5" HDDs, using a kit MCP-220-82609-0N Two slim 2.5" HDDs in a bracket MCP-220-00044-0N One 3.5" HDD No bracket required