SC936 Chassis Manual 4-2 Removing the Chassis Cover Release Tab 4 3 2 2 Removing the Chassis Cover Figure 4-1: Removing the Chassis Cover 1. Power down the system and remove the power cord from the rear of the power supply. 2. Press the release tabs to remove the cover from the locked position. Press both tabs at the same time. 3. Once the top cover is released from the locked position, slide the cover back toward the rear of the chassis. Warning: Except for short periods of time, do NOT operate the server without the cover in place. The chassis cover must be in place to allow proper airflow and prevent overheating. 4. Lift the cover off the chassis. 4-2