Chapter 4: Chassis Setup and Maintenance 4-3 Removing Hard Drives From the Chassis 1 Release Button Figure 4-2: Removing Drive Carriers The SC936 chassis features hot-swappable hard drives which can be removed from the chassis without powering down the system. Removing Hard Drive Carriers from the Chassis 1. Press the release button on the drive carrier. This extends the drive carrier handle. 2. Use the handle to pull the drive out of the chassis. The drives are mounted in drive carriers to simplify their installation and removal from the chassis. These carriers also help promote proper airflow within the drive bays. Warning:
Except for short periods of time (while swapping hard drives), do not operate the server with any drive carrier removed. 4-3