Supermicro SC936E16-R1200B — Supermicro SC936E16-R1200B Chassis Manual: 3U Server with Hot-Swappable Drives

SC936 Chassis Manual 4-4 Installing Hard Drives 1. Remove the screws securing the dummy drive to the drive carrier. Installing a Hard Drive to the Hard Drive Carrier 2. Remove the dummy drive. Place the hard drive carrier on a flat surface such as a desk, table or work bench. 1 Dummy Drive 2 Drive Carrier 1 Figure 4-3: Removing the Dummy Drive from Carrier 3. Slide the hard drive into the carrier with the printed circuit board side facing down. 4. Carefully align the mounting holes in both the drive carrier and the hard drive. 5. Secure the hard drive to the carrier using the screws provided. 6. Replace the drive carrier into the chassis.

Make sure to close the drive carrier handle to lock the drive carrier into place. 4 3 SAS or SATA Hard Drive 4 Drive Carrier Figure 4-4: Installing the Hard Drive 4-4