Supermicro SC936E16-R1200B — Supermicro SC936E16-R1200B Chassis Manual: 3U Server with Hot-Swappable Drives

Chapter 4: Chassis Setup and Maintenance 4-9 Power Supply The SC936 chassis has an auto-switching power supply. This enables it to automati­ cally sense and operate at a 100v to 240v input voltage. An amber light illuminates on the power supply when the power is off. An illuminated green light indicates that the power supply is operating. The SC936 chassis includes a redundant power supply that can be changed without powering down the system. In the unlikely event that one is necessary, a new unit can be ordered directly from Supermicro (see contact information in the Preface). Release Tab Figure 4-9: Removing the Power Supply Changing the Power Supply 1.

This chassis includes a redundant power supply which allows the server to remain running and one power supply to be removed. Remove the AC power cord from the failed module. 2. Push the release tab on the power supply, as illustrated. 3. Pull the power supply out using the handle provided. 4. Change the failed power module with the same model. 5. Push the new power supply module into the power bay until you hear a click. 6. Plug the AC power cord back into the module and power up the server. 4-11