Supermicro SC936E16-R1200B — Supermicro SC936E16-R1200B Chassis Manual: 3U Server with Hot-Swappable Drives

SC936 Chassis Manual 6. Backplane Main Power Connectors The 4-pin connectors, designated JP10, JP13, JP46 and JP48, provide power to the backplane. See the table on the right for pin definitions. 7., 8. and 9. Fan Connectors The 3-pin or 4-pin connectors, designated JP54, JP56, and JP58 provide power to the fans. See the table on the right for pin defini­ tions. 10. - 13. SAS IN Ports (Sideband included) The SAS ports are used to connect the SAS drive cables. The four SAS IN ports are des­ ignated #JSM1 - #JSM4. Each port is also compatible with SATA drives. Note:

SGPIO is the default setting for this backplane C-4 Backplane Main Power 4-Pin Connector) Pin# Definition 1 +12V 2 and 3 Ground 4 +5V Fan Connectors Pin# Definition 1 Ground 2 +12V 3 Tachometer 4 No Connection Sideband Definitions Pin # Definition Pin # Definition A11 SGPIO: SDIN I2C: Backplane Addressing (SB5) B11 Controller ID (SB6) A12 SGPIO: SDOUT I2C: Reset (SB4) B10 GND (SB2) A9 GND (SB3) B9 SGPIO: SLOAD I2C:SDA (SB1) A8 Backplane ID (SB7) B8 SGPIO: SCLOCK I2C:SCL (SB0)