(2) Command code: 10H Function: Write N words (Word), N ≥ 2. For example, write 100 to the 0100H address of the slave address 01H servo drive and 400 to the 0101H address of the slave address 01H servo drive. The structure of the frame is described as follows: Host command information: The slave responds to the message:
270 SD700 Series Servo Technical Manual The high content of the starting data address 03F 2H 3AH Content status of the starting data address 03F 2H 9AH The content of the second data address 03F 3H is high 00H The lower content of the second data address 03F 3H 05H CRC CHK low bit 16H CRC CHK high bit C7H END T1-T2-T3-T4(3.5 bytes of transmission time) START T1-T2-T3-T4(3.5 bytes of transmission time) ADDR 01H CMD 10H Write data address high 01H Write data address low 00H The number of data is high (in word) 00H Number of data status (calculated in word) 02H Number of bytes 04H The first word high of the data content 00H The first word of the data content is low 64H The second word high of the data content 01H The second word of the data content is low 90H CRC CHK low bit BEH CRC CHK high bit 1CH END T1-T2-T3-T4(3.5 bytes of transmission time) START T1-T2-T3-T4(3.5 bytes of transmission time) ADDR 01H CMD 10H Write data start address high 01H Write data start address low 00H The number of data is high (in word) 00H Number of data status (calculated in word) 02H CRC CHK low bit 40H CRC CHK high bit 34H END T1-T2-T3-T4(3.5 bytes of transmission time)