14.4 Real-Time Monitoring 1. Real-time monitoring provides real-time monitoring of monitoring parameters and I/O status, as well as current fault information: Step: a). Start the real-time monitoring interface. As shown in the figure below, the monitoring parameters are divided into three groups. The monitoring parameters can be added to the common parameters. b). Check the monitored parameters and monitor the servo. During the monitoring process, you can also export and save the monitoring content. 2. Monitoring parameter export The export of monitoring parameters is a way to output and save the monitoring parameters, which can facilitate the customer to save the monitored parameters. Step:
a). Check the monitored parameters. If you want to export all parameters in the current group, right- click in the monitored parameters area, select All group, and then click Export. Select the save path and save the monitoring data in the EXCEL file format. 14.5 Auxiliary Functions 14.5.1 JOG The JOG operation is a function to confirm the operation of the servo motor by driving the servo motor at the previously set JOG speed (rotation speed) without connecting the host device. By performing this operation confirmation, it is possible to confirm whether or not the connection to the wire is improper and whether the servo motor has failed. 279 SD700 Series Servo Technical Manual