Step: a). Click the icon on the main interface of the host computer to enter the jog operation interface. As shown in the left figure below, click Start, and then click forward rotation. The servo will execute forward rotation, click Reverse, and the motor will perform reverse rotation. 14.5.2 Inertia Identification The inertia Identification function allows the servo unit to perform automatic operation (forward and reverse reciprocating motions), and estimates the moment of inertia of the load during operation. Step: a). Click [Inertia Identification]→[Next] on the host interface to enter the following interface in the 280 SD700 Series Servo Technical Manual