High digit Middle digit Low digit They appear only when the number is a negative 2.4 Operations of Monitoring Display Un Group The monitor displays can be used for monitoring the reference values, I/O signal status, and servo internal status. The panel operator displays the numbers which begin with Un, then let’s take this function as an example to explain the operating method of the monitoring display: when the motor speed is 3000rpm: Long press DATA/SHIFT Enter into monitoring Any interference MODE/SET Monitoring display If you want the monitor to automatically display related information after the servo drive is powered on, set PN003 (default 0xFFF) to a relevant value.
For example, if you want the motor speed to automatically display after the drive is powered on, set PN003 to 00000 (motor speed). For details about the values of each monitoring information, see “Monitor Display”. 35 SD700 Series Servo Technical Manual