2.2 Operations of Auxiliary Functions (Fn group) Auxiliary functions are about performing the settings and adjustment of the servo drive. The panel operator displays the numbers which begin with Fn. Let’s take the JOG function (Fn005) as an example to explain the operating method of the auxiliary functions: JOG prepare Any interface MODE/SET UP JOG Aux functions Long press DATA/SHIFT JOG enable MODE/SET ON UP ： Forward DOWN: Reversal JOG prepare JOG MODE/SET Long press DATA/SHIFT JOG motion Long press DATA/SHIFT 2.3 Operations of Parameter (Pn Group) (1) When the setting range is within 5-digit numbers. Let me introduce the parameters Pn’s setting method:
Take the setting method of the speed loop gain rise from 40.0 to 100.0 as an example: setting Enter setting Any interference MODE/SET UP Long press DATA/SHIFT gain Parameter Speed loop Short press DATA/SHIFT UP Shift Target value Confirm Speed loop MODE/SET Long press DATA/SHIFT gain 闪2s Long press DATA/SHIFT (2) When the setting range is over 6-digit numbers: Because the panel operator could only display 5-digit number, so the setting display with 6-digit number is shown as below: 34 SD700 Series Servo Technical Manual